axle truss
axle swap kit
axle truss
axle swap kit
Sale

Jeep JL 1 TON - APEX Rear 14 bolt Truss Swap Kit

$659.99
$560.99 In Stock Pre-Order Sold out
Notify when available
  • Description
  • Shipping and Refund
  • Reviews

JL 1 TON APEX Rear 14 bolt Truss Swap Kit

The new APEX Truss and Brackets for swapping in a 

AAM 14 bolt 10.5 rear axle into a Jeep JL Wrangler (2018+)


Stronger Design, Lighter Weight, Easier Install

A NEW ERA HAS BEGUN WITH THE ARRIVAL OF THE APEX TRUSS! Artec Industries is proud to announce the next generation of PATENT PENDING axle trusses. This series of trusses not only builds on our experience as the world leader in axle truss design, it brings it to a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry.

The key feature that sets the APEX truss apart is its unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams. Previous version with long weld seams which can be lead to extra weld warping of the axle, longer install times and can be inconsistent. Without long seams to weld, now you drop the truss directly on to the axle and weld it to the axle faster.


Artec Industries is excited to announce the JL ONE TON APEX Rear 14 bolt Truss Swap Kit. This is an advanced truss and bracket system which can be used for AAM 14 bolt 10.5" ring gear. This kit provides the factory link, trackbar, spring, anti-sway bar, bump stop pads and shock locations all encompassed in an axle tube reinforcing truss system. The Sterling axle is a great match to the Superduty Front Dana 60 however there are some considerations to take into account (see below).

 

Features include:

  • PATENT PENDING APEX Truss peaked top design provides more rigidity than a flat top truss design 
  • CNC Precision Laser cut in-house from 1/4" and 3/16" mild steel for a lightweight yet strong solution...only 42 lbs total
  • CNC Precision Bent in-house for a great fitment. Literally drop the truss in place on the axle and it's ready to weld. No puzzle piece assembling*
  • Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components
  • 70% less welding needed than previous truss designs means less warping, faster turnaround, and lower costs
  • All long seams are bent so you don't need to spend time welding them together
  • Dimpled holes provide not only weight reduction but rigidity and strength
  • Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating
  • Two piece truss design means smaller packaging and less shipping costs along with easy installation
  • Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions
  • Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets
  • Precision CNC cut from 1/4"& 3/16" steel for high strength and precision and CNC bent for great fitment.*
  • Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, trackbar mount, bumpstop pads and coil spring mounts.
  • Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets
  • Tracbar mount includes 4 locations for those who have aftermarket lifts. Stock height hole is not included though.
  • Coil Spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap style locators
  • Shock brackets have been moved up for a slightly higher clearance lower control arm bracket
  • Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount (not included)


IMPORTANT NOTE FOR 14 BOLT: The 14 bolt axle is available in a variety of vehicles over several decades. In order for the JK swap to work with factory UCA brackets, the correct width axle must be used. If you are not using factory UCA brackets, but rather a 3-link style system mounted on the truss, you can choose any width axle you need but take care to ensure its width is close to the front axle. Older 14 bolt axles will not work with ABS brackets we offer either.

THIS KIT IS INTENDED FOR USE WITH A NEWER STYLE 14 BOLT AXLE WITH RIBBING ON THE CASTING (AS SHOWN) AND HAS A WMS-WMS MEASUREMENT OF 68" OR GREATER. This axle is referred to as an AAM 14 bolt 10.5" ring gear and is found in '99-'06 GM 2500 and 3500 SRW trucks. Van axles have a different differential offset and will not align the truss correctly.



NOTE: This kit does not include any parts for ABS sensors. It is only a bracket kit. Hooking up and configuring these sensors is the responsibility of the end user. We offer ABS brackets and tone rings for 14 bolt and Sterling (Coming soon).


Most 1 ton axles DO NOT MATCH the factory JK 5 lug wheel bolt pattern. New wheels will need to be purchased to do this swap. Brake components NOT INCLUDED in this product, but will be available separately shortly. 
 

NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder who understand different materials. Some welding of cast and mild steel will be used. Artec Industries implies no guarantees or warranties and is not liable for improper installation.
*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit.

 

🧾 Rock Rig Supply Return Policy

At Rock Rig Supply, we get it — sometimes a part just doesn’t fit the build, or a project takes a left turn halfway up the hill. We’ve been there. That’s why our return policy keeps things simple, fair, and flexible (because real-world wrenching isn’t always perfect).


🕒 1. Return Window

  • Returns are accepted within 30 days of delivery.

  • Items must be unused, uninstalled, and in original condition with all packaging.

  • Every return gets inspected before we process it — we don’t cut corners, and we don’t want you to either.


🔧 2. Custom & Built-to-Order Parts

  • Custom, one-off, or built-to-order parts carry a 50% restocking fee.

  • They’ve been made just for you, so we can only take them back if they’re unused and still in sellable shape.


💰 3. Refunds & Store Credit

  • You can choose between a refund or store credit after your return is approved.

  • Some items may have an additional restocking fee depending on condition.

  • Refunds typically appear 7–10 business days after approval, depending on your bank.


🚚 4. Return Shipping

  • If we messed up (wrong item, damaged, or defective), we’ll cover return shipping and send you a replacement on our dime.

  • If it’s a “changed my mind” or “wrong fit” situation, you’ll cover return shipping.

  • Not sure which way it goes? Shoot us an email at rockrigsupply@gmail.com and we’ll help you sort it out.


⚙️ 5. Used or Installed Products

We know how it goes — sometimes you bolt something up and realize it’s not gonna work.
If the part’s been used or installed, email us first at rockrigsupply@gmail.com.
Returns for used parts are handled case-by-case at our discretion because we understand that not every project goes as planned.


🧰 6. Garage Sale Items

Our Garage Sale section is full of awesome deals — open-box, blemished, and used parts that still have plenty of life left.

  • All Garage Sale items are sold “as-is.”

  • No returns, refunds, or warranties on these.

  • We do our best to describe the condition, but little quirks or wear come with the territory.
    You’re scoring a deal, and we’re clearing the shop — win-win.


🔄 7. Exchanges & Buy-Backs

  • Unused, uninstalled items qualify for free exchanges or store credit.

  • If a part’s been installed or opened, we may offer a buy-back depending on its condition and resale potential.


🚫 8. Non-Returnable Items

  • Gift cards, Garage Sale items, and consumables (fluids, sealants, etc.) are non-returnable.

  • Items missing packaging or showing heavy use may be denied or refunded at a reduced rate.


📬 9. How to Start a Return

  1. Email rockrigsupply@gmail.com with:

    • Your order number

    • Photos (if damaged or defective)

    • A short note about what’s going on

  2. We’ll reply with return instructions or a prepaid label (if applicable).

  3. Once inspected, we’ll issue your refund, store credit, or exchange.


💪 10. The Rock Rig Guarantee

We actually run the parts we sell — they’ve been hammered, flexed, and tested on real trails. If something doesn’t hold up or doesn’t meet your expectations, reach out. We’ll make it right, because that’s how we’d want to be treated.

Contact: rockrigsupply@gmail.com